[XP] Il pc si spegne senza motivo e non segnala errori

[Dorcko]

Salve a tutti, tutto è cominciato lunedì scorso, mentre guardavo un film mi si è bloccato il pc e non ne ha piu' voluto sapere di ripartire, così cercando il motivo dell'interruzione ho cambiato un pezzo per volta tutto il pc esclusi gli hard disk ed il monitor, alla fine a quanto pare era il processore che dava problemi. ora mi ritrovo con il pc nuovo con sceda madre ASUS P5LD2-X/1333 SOCKET 775 945GC(A2) ATX SND+LN+U2 FSB1333(OC) SATA2, 2 DIMM 1GB DDR2 667 PC5300 KINGSTON scheda video GEFORCE 8500GT SUPER, processore INTEL CORE 2 DUO PROCESSOR E6550 LGA775 2.33 GHZ 4MB L2 CACHE 1333MHZ FSB, é da un pò di tempo che mi si spegne il pc e per farlo ripartire devo staccare la spina aspettare che il led verde nella scheda madre si spenga poi ricollegare la spina e accenderlo, al riavvio non mi da nessun errore quindi sono andato a vedere in strumenti di amministrazione, visualizzatore eventi, sistema. In corrispondenza all'orario dello spegnimento mi da questo errore:
Origine: service control manager
Categoria: nessuno
ID evento:7000 Il servizio Cardex non è stato avviato per il seguente errore:
Impossibile creare un file, se il file esiste già.

Per ulteriori informazioni, consultare la Guida in linea e supporto tecnico all'indirizzo http://go.microsoft.com/fwlink/events.asp.

Ho provato a leggere la guida ma è in inglese e ci capisco poco niente questo è quello che riporta:
Details
Product: Windows Operating System
ID: 7000
Source: Service Control Manager
Version: 5.0
Symbolic Name: EVENT_SERVICE_START_FAILED
Message: The %1 service failed to start due to the following error:
%2.

Explanation
Service Control Manager (SCM) could not start the specified service, probably because the service is not configured correctly.


User Action
Do one or all of the following:

Review the error information displayed in the message.
Verify that the service password has not expired.
Verify that the service is in the correct location.
Verify that the service is not infected with a virus.
To display the WIN32_EXIT_CODE error that SCM encountered when trying to start the program, at the command prompt, type
sc query service name
The information displayed can help you troubleshoot possible causes for the error.
If the WIN32_EXIT_CODE is zero, then SCM did not attempt to start the service because the error was detected first.



Version: 5.2
Symbolic Name: EVENT_SERVICE_START_FAILED
Message: The %1 service failed to start due to the following error:
%2

Explanation
Service Control Manager (SCM) could not start the specified service, probably because the service is not configured correctly.


User Action
Do one or all of the following:

Review the error information displayed in the message.
Verify that the service password has not expired.
Verify that the service is in the correct location.
Verify that the service is not infected with a virus.
To display the WIN32_EXIT_CODE error that SCM encountered when trying to start the program, at the command prompt, type
sc query service name
The information displayed can help you troubleshoot possible causes for the error.

If the WIN32_EXIT_CODE is zero, then SCM did not attempt to start the service because the error was detected first.



--------------------------------------------------------------------------------

Related Knowledge Base articles
You can find additional information on this topic in the following Microsoft Knowledge Base articles:
• "Event ID: 7000" or "Event ID: 7013" Error Message When You Attempt to Start a Service
http://support.microsoft.com/kb/314357/en-us
Describes a problem with logon failures when you try to start a service. Provides several resolutions.
• "Event ID: 7000" Error Message When ASCTRM Service Does Not Start
http://support.microsoft.com/kb/817194/en-us
On a computer that is running Windows NT 4.0, Windows 2000, or Windows XP, when you install or remove RealNetworks RealPlayer 8, or when you install or remove a program that installs RealPlayer 8 (for example, Netscape Navigator), the following...
• Availability and description of the Port Reporter tool
http://support.microsoft.com/kb/837243/en-us
Describes the Port Reporter tool that you can use to log TCP and UDP port activity on computers that are running Windows Server 2003, Windows XP, and Windows 2000. Contains information about how to obtain, install, and configure the tool.
• "CD Recording Software Will Cause Windows to Become Unstable" error message when you start Windows XP
http://www.microsoft.com/products/ee/tr ... rore&LCID=
Explains why you may receive a “CD Recording software will cause Windows to become unstable” error message when you start Windows XP. The article contains a workaround.
• Your Windows XP computer stops responding after you log on
http://support.microsoft.com/kb/823830/en-us
Provides a resolution for an issue that occurs when you log on to a computer that is running Windows XP, an "Applying local settings" message appears, and the computer stops responding.

Spero qualcuno possa aiutarmi io sono negato con l'inglese vi ringrazio per l'attenzione e spero di aver esposto in maniera chiara il problema.
Ciao a tutti