Messaggi d'errore durante prove di masterizzazione con Nero

[fabionapoli]

Ieri sera ho tentato di masterizzare due cd con Nero in modalità DAO, in entrambe i casi ho avuto due messaggi d'errore di cui vi allego il LOG.

Premetto che si tratta di cd di mp3 registrati in multisessione.

Il tentativo di copia in modalità TAO va invece a buon fine, anche se sia il lettore di cd Asus eide che il Plex scsi ci impiegano circa dieci minuti per effettuare la lettura del cd.

p.s.
In questo momento sto provando ad effettuare la copia al volo di un cd dati fatto da me e funge tutto egregiamente.


LOG n° 1
Windows 98 4.10
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/99 12.06.00
Nero Version: 5.5.1.8
Recorder: <YAMAHA CRW2100S> Version: 1.0H - HA 1 TA 5 - 5.5.1.8
Adapter driver: <aic78xx> HA 1
Drive buffer : 8192kB
CD-ROM: <ASUS CD-S500/A> Version: 1.2D - HA 2 TA 0 - 5.5.1.8
Adapter driver: <ESDI_506> HA 2
ASUS CD-S500/A (Target 0, I:): Autoinsert On, DMA On, Disconnect On, SyncDataXfer Off
PLEXTOR CD-ROM PX-40TS (Target 3, E:): Autoinsert Off, DMA ?, Disconnect On, SyncDataXfer Off
PLEXTOR CD-R PX-W1210S (Target 4, F:): Autoinsert Off, DMA ?, Disconnect On, SyncDataXfer Off
YAMAHA CRW2100S (Target 5, G:): Autoinsert Off, DMA ?, Disconnect On, SyncDataXfer Off
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 34603008 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 255MB (261340kB)
Free physical memory: 1MB (1692kB)
Memory in use : 59 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry: 1
Wizard: Off

CD-Copy
14.5.2001

1.54.34 #1 Text 0 File Writer.cpp, Line 125
Writer CRW2100S running

1.55.00 #2 Text 0 File Burncd.cpp, Line 1497
Recorder: YAMAHA CRW2100S;
CDR code: 00 97 28 22; OSJ entry from: Multi Media Masters && Machinary SA
ATIP Data:
Special Info [hex] 1: D0 00 80, 2: 61 1C 16 (LI 97:28.22), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

1.55.00 #3 Text 0 File ThreadedTransferInterface.cpp, Line 800
Prepare recorder CRW2100S for write in cue-sheet-DAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Close CD
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 708464640

1.55.00 #4 Text 0 File ThreadedTransferInterface.cpp, Line 665
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 Data (mode 1))
2 indices, index0 (150) not provided
original CD pos #0 + 345780 (345780) = #345780/76:50.30
relocatable, CD pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 345780 blocks [CRW2100S ]
--------------------------------------------------------------

1.55.00 #5 Phase 24 File dlgbrnst.cpp, Line 1372
Start of caching files

1.55.00 #6 Phase 25 File dlgbrnst.cpp, Line 1372
Caching files completed

1.55.00 #7 Phase 32 File dlgbrnst.cpp, Line 1372
Start of simulation at 8x (1200 KB/s)

1.55.00 #8 Text 0 File ThreadedTransferInterface.cpp, Line 1836
Verifying CD position of item 0 (relocatable, no CD pos, no patch infos, orig at #0): write at #0

1.57.30 #9 SCSI -1135 File Cdrdrv.cpp, Line 1392
SCSI Exec, HA 1, TA 5, LUN 0, buffer 0x035EAF6C
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x0A
CDB Data: 0x2A 0x00 0x00 0x00 0xA3 0x5C 0x00 0x00 0x1E 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x0A

1.57.30 #10 mmc -1135 File Writer.cpp, Line 311
Write error

1.57.30 #11 Text 0 File ThreadedTransfer.cpp, Line 218
all writers idle, stopping conversion

1.57.31 #12 Text 0 File ThreadedTransfer.cpp, Line 212
conversion idle, stopping reader

1.57.31 #13 SCSI -1135 File Cdrdrv.cpp, Line 1183
SCSI Exec, HA 1, TA 5, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x0A
CDB Data: 0x35 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x0A

1.57.33 #14 Phase 34 File dlgbrnst.cpp, Line 1372
Simulation failed at 8x (1200 KB/s)

1.57.33 #15 Text 0 File Scsicmd.cpp, Line 371
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated


Existing drivers:
File 'IoSubSys\SCSI1HLP.VXD': Ver=4.10.1998, size=19270 bytes, created 05/05/99 22.22.00
File 'IoSubsys\NEROCD95.VXD': Ver=4, 0, 0, 16, size=33451 bytes, created 07/05/01 2.15.32
File 'IoSubsys\CDR4VSD.VXD': Ver=2.5 (089), size=197984 bytes, created 10/04/00 7.10.56
File 'IoSubsys\CDFS.VXD': Ver=4.10.1998, size=59133 bytes, created 05/05/99 22.22.00
File 'IoSubsys\ESDI_506.PDR': Ver=4.10.2222, size=24406 bytes, created 05/05/99 22.22.00
File '..\System\Vmm32\Ios.vxd': Ver=4.10.2222, size=69574 bytes, created 05/05/99 22.22.00
File 'IoSubsys\Disktsd.vxd': Ver=4.10.2222, size=18809 bytes, created 05/05/99 22.22.00
File 'IoSubsys\ElbyCDIO.vxd': Ver=3, 1, 2, 5, size=13587 bytes, created 06/04/01 13.44.02
File 'IoSubsys\BSUDF.VXD': Ver=2.11, size=118948 bytes, created 10/04/01 15.23.26
File 'IoSubsys\CDRBSVSD.VXD': Ver=1.1.1, size=8783 bytes, created 20/09/99 1.11.00
Grazie a tutti per l'aiuto e scusatemi se ho riempito di informazioni questo post.



LOG n°2
Windows 98 4.10
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/99 12.06.00
Nero Version: 5.5.1.8
Recorder: <YAMAHA CRW2100S> Version: 1.0H - HA 1 TA 5 - 5.5.1.8
Adapter driver: <aic78xx> HA 1
Drive buffer : 8192kB
CD-ROM: <ASUS CD-S500/A> Version: 1.2D - HA 2 TA 0 - 5.5.1.8
Adapter driver: <ESDI_506> HA 2
ASUS CD-S500/A (Target 0, I:): Autoinsert Off, DMA On, Disconnect Off, SyncDataXfer On
PLEXTOR CD-ROM PX-40TS (Target 3, E:): Autoinsert Off, DMA ?, Disconnect Off, SyncDataXfer On
PLEXTOR CD-R PX-W1210S (Target 4, F:): Autoinsert Off, DMA ?, Disconnect On, SyncDataXfer Off
YAMAHA CRW2100S (Target 5, G:): Autoinsert Off, DMA ?, Disconnect On, SyncDataXfer Off
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 34603008 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 255MB (261340kB)
Free physical memory: 125MB (128032kB)
Memory in use : 33 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry: 1
Wizard: Off

CD-Copy
14.5.2001

7.10.36 #1 Text 0 File Burncd.cpp, Line 1497
Recorder: YAMAHA CRW2100S;
CDR code: 00 97 28 22; OSJ entry from: Multi Media Masters && Machinary SA
ATIP Data:
Special Info [hex] 1: D0 00 80, 2: 61 1C 16 (LI 97:28.22), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

7.10.36 #2 Text 0 File ThreadedTransferInterface.cpp, Line 800
Prepare recorder CRW2100S for write in cue-sheet-DAO + TAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Close CD
Tracks 1 to 3:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 22120448
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 22120448 23963648 648206336
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 648206336 648513536 656504832

7.10.36 #3 Text 0 File ThreadedTransferInterface.cpp, Line 828
Removed 2 run-out blocks from end of track 3.

7.10.36 #4 Text 0 File ThreadedTransferInterface.cpp, Line 665
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 Data (mode 1))
2 indices, index0 (150) not provided
original CD pos #0 + 10651 (10651) = #10651/2:22.1
relocatable, CD pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 10651 blocks [CRW2100S ]
1: TRM_DATA_MODE1 (2 Data (mode 1))
2 indices, index0 (900) not provided
original CD pos #11551 + 304806 (304806) = #316357/70:18.7
not relocatable, CD pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 304806 blocks [CRW2100S ]
--------------------------------------------------------------
2: TRM_DATA_MODE1 (3 Data (mode 1))
2 indices, index0 (150) not provided
original CD pos #327757 + 3902 (3902) = #331659/73:42.9
not relocatable, CD pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 3900 blocks [CRW2100S ]
--------------------------------------------------------------

7.10.36 #5 Phase 24 File dlgbrnst.cpp, Line 1372
Start of caching files

7.10.36 #6 Phase 25 File dlgbrnst.cpp, Line 1372
Caching files completed

7.10.36 #7 Phase 32 File dlgbrnst.cpp, Line 1372
Start of simulation at 12x (1800 KB/s)

7.10.37 #8 Phase 70 File dlgbrnst.cpp, Line 1372
Only simulation of first session possible

7.10.37 #9 Text 0 File ThreadedTransferInterface.cpp, Line 1836
Verifying CD position of item 0 (relocatable, no CD pos, no patch infos, orig at #0): write at #0

7.10.37 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1836
Verifying CD position of item 1 (not relocatable, no CD pos, no patch infos, orig at #11551): write at #11551

7.10.37 #11 SCSI -1047 File Cdrdrv.cpp, Line 1183
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x0506C184
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x64
Sense Qual: 0x00
CDB Data: 0x28 0x00 0x00 0x00 0x00 0x78 0x00 0x00 0x1E 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x64 0x00

7.10.37 #12 CDR -1047 File TrackPFile.cpp, Line 185
Illegal mode for this track

7.10.37 #13 TRANSFER -25 File Reader.cpp, Line 400
Error reading Data

7.10.37 #14 Text 0 File ThreadedTransfer.cpp, Line 224
conversion failed, stopping writers

7.10.37 #15 Phase 34 File dlgbrnst.cpp, Line 1372
Simulation failed at 12x (1800 KB/s)

7.10.37 #16 Text 0 File Scsicmd.cpp, Line 371
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated


Existing drivers:
File 'IoSubSys\SCSI1HLP.VXD': Ver=4.10.1998, size=19270 bytes, created 05/05/99 22.22.00
File 'IoSubsys\NEROCD95.VXD': Ver=4, 0, 0, 16, size=33451 bytes, created 07/05/01 2.15.32
File 'IoSubsys\CDR4VSD.VXD': Ver=2.5 (089), size=197984 bytes, created 10/04/00 7.10.56
File 'IoSubsys\CDFS.VXD': Ver=4.10.1998, size=59133 bytes, created 05/05/99 22.22.00
File 'IoSubsys\ESDI_506.PDR': Ver=4.10.2222, size=24406 bytes, created 05/05/99 22.22.00
File '..\System\Vmm32\Ios.vxd': Ver=4.10.2222, size=69574 bytes, created 05/05/99 22.22.00
File 'IoSubsys\Disktsd.vxd': Ver=4.10.2222, size=18809 bytes, created 05/05/99 22.22.00
File 'IoSubsys\ElbyCDIO.vxd': Ver=3, 1, 2, 5, size=13587 bytes, created 06/04/01 13.44.02
File 'IoSubsys\BSUDF.VXD': Ver=2.11, size=118948 bytes, created 10/04/01 15.23.26
File 'IoSubsys\CDRBSVSD.VXD': Ver=1.1.1, size=8783 bytes, created 20/09/99 1.11.00

[fabionapoli]

Canaro mi sa che se qui non rispondi tu non ne vengo fuori

[Einstein]

A me puzza un po' quello SCSI1HLP.VXD... Io proverei a rinominarlo, in modo che Windows non lo carichi e vedi cosa succede...

Ciao

[fabionapoli]

Potrei provare a toglierlo dalla cartella di sistema di windows e vedere come va.
Spiegami però sulla base di cosa quel file ti puzza?
Grazie e ciao
Fabio

[bodyzen]

[QUOTE]Originally posted by fabionapoli
Ieri sera ho tentato di masterizzare due cd con Nero in modalità DAO, in entrambe i casi ho avuto due messaggi d'errore di cui vi allego il LOG.

Premetto che si tratta di cd di mp3 registrati in multisessione.

Non capisco come hai fatto a scrivere un multisessione in DAO. Quando registri un multisessione la casella della modalità DAO non è selezionabile. ??? :)

[fabionapoli]

Isobuster mi dice che il cd è un multisessione e pure Feurio mi conferma ciò, però non me li masterizza perchè non è in versione Professional
Nero 5.5 in modalità "copia Cd" mi permette di selezionare l'opzione DAO con tutti e due i masterizzatori.

Spiegami una cosa, ma non è consentito copiare un cd multisessione in modlità DAO?
Perchè?
Ciao
Fabio

[fabionapoli]

Yes, I need your help, don't forget about me.
Thanks a lot. :( :rolleyes:
Fabio

[Recordable]

...a me mi ha rotto le palle fino a che non è uscito win98se, se caricavo il nero in Win 95 e 98 dovevo per forza eliminare quella vxd sennò non mi partiva nemmeno win.
Anche Il feurio segnala che è un file a rischio...
Io proverei a rinominarlo, le contrindicazioni ci sono comumque..molto probabilmente alcuni cd smettono di funzionare (i vecchi videocd ad alcuni enached)....

[fabionapoli]

Hai forse avuto il mio stesso problema?Perchè questo file vxd è così fastidioso per la masterizzazione?

[Canaro]

in effetti è sempre quello il vxd che va in conflitto con directCD

cmq prova a rinominarlo, per esempio

scsi1hlp.vxd.ori

così con la doppia estensione ti ricordi...

in merito a nero.. non sò... ho installato il 5518 in win XP e con l'audio ha solo dei problemi
notare che la versione 4091 con lo stesso PC funzia benissimo

[fabionapoli]

Grazie a tutti, ora provo e vi faccio sapere.
p.s. non è che l'aggiornamento di Winzozz merdia playere mi ha creato sto casino?? :p

[fabionapoli]

Continua lo stesso problema, ora provo a reinstallare Nero 5.0.48

[bodyzen]

Originally posted by fabionapoli
Spiegami una cosa, ma non è consentito copiare un cd multisessione in modlità DAO?
Perchè?
Ciao
Fabio
Normalmente i multisessione sono sempre in modalità TAO, xchè è piu' semplice aggiugere le tracce volta x volta.
Non avevo notato che Nero 5518 consente in MS anche la DAO.
:)

[fabionapoli]

Adesso ho smesso di fare prove con Nero 5.5., ho reinstallato la versione 5.0.48 e non ho più nessun problema, e non ho modificato alcun file vxd.
Vi allego il log della prova.


Windows 98 4.10
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/99 12.06.00
Versione di Nero: 5.0.4.8
Masterizzatore: <YAMAHA CRW2100S> Versione: 1.0H - HA 1 TA 5 - 5.0.4.8
Driver Adattatore: <aic78xx> HA 1
Drive buffer : 8192kB
CD-ROM: <PLEXTOR CD-ROM PX-40TS> Versione: 1.12 - HA 1 TA 3 - 5.0.4.8
Driver Adattatore: <aic78xx> HA 1
ASUS CD-S500/A (Target 0, I:): Autoinsert Off, DMA On, Disconnect Off, SyncDataXfer On
PLEXTOR CD-ROM PX-40TS (Target 3, E:): Autoinsert Off, DMA ?, Disconnect Off, SyncDataXfer On
PLEXTOR CD-R PX-W1210S (Target 4, F:): Autoinsert Off, DMA ?, Disconnect On, SyncDataXfer Off
YAMAHA CRW2100S (Target 5, G:): Autoinsert Off, DMA ?, Disconnect On, SyncDataXfer Off
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 34603008 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 255MB (261340kB)
Free physical memory: 119MB (122024kB)
Memory in use : 34 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry: 1
Wizard: Off

CD-ROM (ISO)
14.5.2001

19.00.15 #1 Text 0 File Reader.cpp, Line 116
Reader running

19.00.15 #2 Text 0 File Writer.cpp, Line 108
Writer YAMAHA CRW2100S running

19.00.15 #3 ISO9660GEN -11 File geniso.cpp, Line 3245
First writeable address = 0 (0x00000000)

19.00.16 #4 Text 0 File ThreadedTransferInterface.cpp, Line 644
Setup items (original item values)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 312997 (312997) = #312997/69:33.22
relocatable, CD pos for caching/writing not required/required, no patch infos
--------------------------------------------------------------

19.00.20 #5 Text 0 File Burncd.cpp, Line 1661
Recorder: YAMAHA CRW2100S;
CDR code: 00 97 28 22; OSJ entry from: Multi Media Masters && Machinary SA
ATIP Data:
Special Info [hex] 1: D0 00 80, 2: 61 1C 16 (LI 97:28.22), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

19.00.20 #6 Text 0 File ThreadedTransferInterface.cpp, Line 778
Prepare recorder YAMAHA CRW2100S for write in cue-sheet-DAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Close Session
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 641325056

19.00.20 #7 Text 0 File ThreadedTransferInterface.cpp, Line 644
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 312997 (312997) = #312997/69:33.22
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 312997 blocks [YAMAHA CRW2100S]
--------------------------------------------------------------

19.00.20 #8 Phase 24 File dlgbrnst.cpp, Line 1193
Inizio ottimizzazione file

19.00.20 #9 Phase 25 File dlgbrnst.cpp, Line 1193
Ottimizzazione file completata

19.00.20 #10 Phase 32 File dlgbrnst.cpp, Line 1193
Inizio simulazione a 16x (2400 KB/s)

19.00.20 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1765
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0

19.05.24 #12 Text 0 File ThreadedTransfer.cpp, Line 216
all writers idle, stopping conversion

19.05.37 #13 Phase 33 File dlgbrnst.cpp, Line 1193
Simulazione eseguita correttamente a 16x (2400 KB/s)

19.05.37 #14 Text 0 File Scsicmd.cpp, Line 311
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated


Existing drivers:
File 'IoSubSys\SCSI1HLP.VXD': Ver=4.10.1998, size=19270 bytes, created 05/05/99 22.22.00
File 'IoSubsys\NEROCD95.VXD': Ver=4, 0, 0, 8, size=30887 bytes, created 14/05/01 18.55.02
File 'IoSubsys\CDR4VSD.VXD': Ver=2.5 (089), size=197984 bytes, created 10/04/00 7.10.56
File 'IoSubsys\CDFS.VXD': Ver=4.10.1998, size=59133 bytes, created 05/05/99 22.22.00
File 'IoSubsys\ESDI_506.PDR': Ver=4.10.2222, size=24406 bytes, created 05/05/99 22.22.00
File '..\System\Vmm32\Ios.vxd': Ver=4.10.2222, size=69574 bytes, created 05/05/99 22.22.00
File 'IoSubsys\Disktsd.vxd': Ver=4.10.2222, size=18809 bytes, created 05/05/99 22.22.00
File 'IoSubsys\ElbyCDIO.vxd': Ver=3, 1, 2, 5, size=13587 bytes, created 06/04/01 13.44.02
File 'IoSubsys\BSUDF.VXD': Ver=2.11, size=118948 bytes, created 10/04/01 15.23.26
File 'IoSubsys\CDRBSVSD.VXD': Ver=1.1.1, size=8783 bytes, created 20/09/99 1.11.00

[bodyzen]

Mah, certo che questa 5518 è un vero mistero. :)